This kit is now available. Kit produces 245 h.p. and 262 torque. That is 80+ h.p. than stock. Kit includes everything needed to install. Comes with BiG 16G TURBO, Tial External wastegate, Ceramic Coated Tubular Turbo Manifold, Turbo Downpipe ,RRM Front Mount Intercooler, BOV, all piping, fuel management system, Injectors etc. and complete oil system. It is everything one needs to turn your Mivec Engine into a turbo powerhouse. Installer friendly and reliable! Call us for details.

Click here for view of front mount intercooler.

See dyno sheets

Pic of kit layout

5 speed kits.

Call to Order!

$4399

Mitsubishi Lancer 02+ Megan Coilovers

Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mounts to easily tune and adjust your camber. Adjustable camber gives you an edge on most suspension setups, as you can easily tune your car for any ride height which improves handling, predictability and furthermore tire wear, which is a great benefit both on the racetrack and on the street.
The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection.
- Designed for the 2002+ Mitsubishi Lancer ES/OZ and Ralliart
- Spring Rates: 8kg Front and 6kg Rear
- 32 Levels of Adjustable Damper
- Pillow Ball Upper Mounts.
- Rubber Dust Covers.
- Adjustable Ride Height
- Aggressive Spring Rates
- Single-Cylinder Design
- Aluminum Brackets
32 Levels of Adjustment:
1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.
- All coilover damper kits come with 1 year manufacture-defect warranty.
- All Hardware is Included

$999

Add Item

TEIN SUPER STREET Coilover Kit 02-06

Sport handling and driving comfort combined. TEIN has developed advanced technology to design the shell case and stroke to bring out the full potential of your vehicle. The features of the TEIN Super Street Damper were designed with greater performance to satisfy all your driving demands. This high performance damper can be used for weekend racing and/or daily driving. The discomfort caused by uneven roads or bumps are eliminated on daily street use. For race use, the ride height adjustable system enables you to adjust ride height and 16 levels of damping force. In other words, you can set your vehicle to meet all situations! All four adjustable Struts and Springs .

1189.00

IN STOCK. Don't be fooled into buying elsewhere. No one stock TEIN for Lancer!

Add Item

ROAD/RACE Race Series Header/Downpipe 04-06

Fits Autos and 5 speeds

NEW for 2006 is the Ralliart Ceramic coated header and downpipe. Built to last and outperform all others, this combo is a potent combination for 4G69s. Fit all models and years. These are in limited production so orders will only be taken by phone.

We have 14 in stock but it is limited.

$499

Add Item

ROAD/RACE Ralliart 2.4 liter CAT ELIMINATOR KIT. For RAs with bolt in cat.

Later 05 and 06 Ralliarts changed downpipes and have bolt on cat converters. They are separate from the downpipes. Simple and cost effectively, the mod to do on these RAs is install the one of these. Top end power will increase a good 3-5 h.p. depending on the mods you have. Plus these will come will CEL eliminators so no worries. Comes with all hardware. Direct bolt on.

$89

Add Item

ROAD/RACE Ralliart 2.4 liter Forged Aluminum Pistons

These pistons are the perfect replacement for the RA. For guys pushing the limits you need a better piston. Features include forge aluminum construction, thicker ring land and true seal pistons rings.

Special Order

Set of 4 $799

Call to order these!

RRM Piggyback Controller Software (CD ROM)

The software is a WindowsTM based software package that provides the user interface for all of RRM's Piggyback ECU units. It will allow you to optimize your tune , tune for street or strip, various octanes and you can mazimize new mods from cams to pistons or intakes. It operates on a WindowsTM 95/98, XP or 2000 platform. An unlimited number of user or customer files can be created. Within these files are the three dimensional maps and settings that are used to control fuel delivery, ignition timing, EGO sensor offset and a variety of other engine parameters.

CLICK HERE FOR DETAILS

$49

Add Item

CHECK OUT OUR Dyno Sheet for 3 engine mods. RRM CAI, RRM Exhaust, and Piggyback ECU= 27 w.h.p. gain!

Add Item

RRM/ MAGNA FLOW Stainless Catback Exhaust

04-06 Ralliarts

This is brand new. Beautifully crafted catback system is completely stainless including piping. 2.25 inch diameter piping is perfect for N/A or Turbo setup. Include polished stainless muffler and 3.5 inch dual wall tip. It will not burn your bumper! For 04-06 Ralliarts only.

459.00

Add Item

ZEITRONIX WIDEBAND

This outstanding system has datalogging capabilities and the most accurate reading wideband of any on the market.

Click here for details

ROAD/RACE "Check Engine Light" Eliminator (For Headers/ Downpipes)

This mechanical extender screws in where you second o2 sensor screws in. Then you install the sensor into it. It is designed to modify voltage in such a way as to avoid "CEL' due to a header or RA Downpipe. Installs in minute and will work with all Lancer headers or Ralliart downpipes. Make that light go out!

$19

Add Item

RALLIART MIVEC ENGINE UNDERDRIVE PULLEY KIT

This pulley kit yielded an improvement of around 6-7whp and around 9ft/lbs of torque. Both the lighter construction and smaller size helps improve power. Comes with belt and pulley. That is all you need. See below for details.

$139

Add Item

Click here for more info and install guide!

ROAD/RACE -Magnaflow Highflow Cat

04-06 Lancer RALLIART.

This Highflow Cat utilizes a Magnaflow OBD-2 Compliant Catalytic Converter. It is a weld on unit. If you are worried about non-street legal parts, this is what you need. Get better top end power while still keeping noise down and the cop off your back.

Road Race Rear Rally Spec Strut Bar 02-06

This is a single tube strut bar. These are the same construction as the front bars we make. They are tough .120 chromoly tubing. These bars are the same as what we use on Rally Cars. It will more than meet your needs to stiffen flex between rear struts. One bolt design withstands 2200 lbs of stress across rear struts and It is a rally style bar and way stiffer that those bolt together TAIWAN strut bars!. If you drive harder than that, we will build you a custom strut bar! Bar comes powder coated. If you want an over-engineered, over priced stress bar, I'm sure you can find one. Rear Stress Bar- SILVER & RED colors only. PLEASE SPECIFY COLOR IN COMMENTS SECTION WHEN ORDERING!!!

Fits Ralliart Lancer without Sub-woofer box.

$99.00

Add Item

Why you should buy our strut bar

ROAD/RACE Rally Series LOWER TIEBAR

This lower tiebar is simply the best, strongest tiebar for the Lancer. Made of chromoly steel and machined for high strength and adjustability. It is designed to stiffen the chassis between the rear lower control arms. TIG welded and beautifully powder coated red. Comes in RED ONLY.

$89


Add Item

ROAD/RACE MIVEC Engine Ported/Polished Intake Manifold

04-06 Ralliart and Sportback and Lancer

These manifolds are ported and polished to maximize air flow for increased power and throttle response. Variable valve timing engines benefit greatly from intake mods like these and figure on 7-10 h.p. increase and improved throttle response. Ports are matched to cylinder head and polished to increase flow.

Special order, core charge of $200 required

$349 Add Item

CORE POLICY- PLEASE READ

ROAD/RACE Race Series Braided Steel Brake Lines

These lines replace the stock rubber brakelines on your RA Lancer. They are perfect replacements and screw right in place. Heat and age can affect rubber lines and take away from braking performance. Also these line look far better than the ugly rubber brake lines.

$89


Add Item

Add Item

Click to see in in a wheel

CHECK OUT OUR Dyno Sheet for 3 engine mods. RRM CAI, RRM Exhaust, and Piggyback ECU= 27 w.h.p. gain!

ROAD/RACE PIGGY BACK ECU Automatic

04-06 Lancer Ralliart/Mivec 2.4 liter.

This ECU add on is designed to maximize the performance of your 2.4 liter Mivec engine. We have maximized the fuel curves to better take advantage of basic mods like intake, header and exhaust. Regardless of mods, this Piggyback unit will increase h.p. for any 2.4 Liter Mivec Engine. It is now available for Automatic Transmission RAs. Expect serious gains in top end power and more torque throughout the powerband. It is the single most effective upgrade you can buy short of a turbo kit.  Furthermore, this unit comes with complete directions for installation and all the necessary hardware needed to install.

Add Item

TOYO TIRES - New Proxes 4

The Proxes 4 is Toyo's new all-season ultra-high performance tire. It is designed primarily for plus-fitment applications on sport compact cars, sports sedans, and coupes. A wide range of tire sizes are available in V and W speed-ratings.

205/50R15 89V 197300 $69
205/40ZR16 83W 197200 $69
205/45ZR16 87W 197210 $79
205/50VR16 91V 197230 $89
205/55VR16 94V 197260 $89
205/40ZR17 84W 197110 $79

More sizes available. Call to order

MORE TIRE TYPES AND DETAILS

Axxis ULTIMATE Brake Pads - Ralliart 04-06

These pads are designed for high performance driving. They afford better grip than stock yet will last far longer. These pads will stand up on the road or racetrack. No fade under heavy heat conditions. In fact, the hotter they get the better they grip. Perfect for use with slotted rotors. Fits All Ralliart Lancers only. The best bar none for Ralliart lancer. does not fit LS Lancers

$89.00

Add Item

Road Race Rear Anti Sway Bar (Mivec/Ralliart Edition)

This rear anti sway bar kit dramatically improves the handling of the RalliArt Lancer. It is 20% stiffer than stock. It helps eliminate understeer by helping stiffen the rear suspension. Our Kit is designed specifically for the Lancer and includes all necessary hardware. New end links with urethane bushings, urethane clamp bushings and bolts. designed just for the 2004-06 Mivec Lancer. Even Ralliart won't give you a bar this big!

RRM AutoCross Sway Bar Perches

These perches replace the stock stamped metal pieces. They are made of 1/8 thick steel, they are 5 time stronger than stock. They will not break or flex. Perches are direct bolt on parts and come with all hardware needed for installation.

BOTH FOR:

$239.00

Add Item

Road Race Progress Spring Kit

If you want a lower sportier ride we have the right springs for you. These springs were designed specifically for Mivec Lancer in conjunction with Progress Group. Springs will lower you car 1.3 inches front and .5 rear. It still leave your car high enough not to kill your stock shocks! This is a pic of these springs installed.

Now painted Charcoal Gray!

$179.00

Add Item

PROGRESS Spring Install Guide

TEIN BASIC DAMPNER KIT for Ralliart


Sport handling and driving comfort combined. TEIN has developed advanced technology to design the shell case and stroke to bring out the full potential of your vehicle. The features of the TEIN Basic Damper kit were designed with greater performance to satisfy all your driving demands. This high performance damper can be used for weekend racing and/or daily driving. The discomfort caused by uneven roads or bumps are eliminated on daily street use. For race use, the ride height adjustable system enables you to adjust ride height. The only difference between these and Super Street is that the dampner is not adjustable. Ride hide is and shorter shock body allow for improved ride even though car is lower than stock.In other words, you can set your vehicle to meet all situations! All four adjustable Struts and Springs . Fit 03-04 LANCER Ralliart!

$849.00

IN STOCK. Don't be fooled into buying elsewhere. No one stock TEIN for Lancer!


Add Item

ROAD/RACE SHORT RAM INTAKE- for Ralliart-

AUTOMATIC and MANUAL TRANSMISSIONS

04-06 Lancer

OUR INTAKEs OUT DYNOED , INJEN and AEM!
This intake fit both Manual transmission and automatic transmissions. Expect to drop a full second in 0 - 60 mph times with this intake as the MIVEC kicks in and this engine culps in air! This kit includes all parts needed to install the intake without damaging stock components. CNC machined MAS sensor holder and adapter bolts right up and the kit includes the largest filter we could fit in front of the battery! Powder coated red only!

$149

PIC INSTALLED


add Item

CHECK OUT OUR Dyno Sheet for 3 engine mods. RRM CAI, RRM Exhaust, and Piggyback ECU= 27 w.h.p. gain!

ROAD/RACE Cold AIR Intake for Mivec engine. 2004-2006

This is our own creation.The new version incorporates a CNC MAS housing for better flow and a cleaner look. We use nothing but the best components to increase power! This intake alone will yield anoth 10 h.p. Powder coated red, it comes with all hardware and cone filter. For 5 speed only! OUR INTAKEs OUT DYNOED , INJEN and AEM!

$199.00

Add Item

Call to order it in ceramic coat, chrome. $229PIC

CHECK OUT OUR Dyno Sheet for 3 engine mods. RRM CAI, RRM Exhaust, and Piggyback ECU= 27 w.h.p. gain!

ROAD/RACE Axel Back Exhaust 04-05

This is the best and only exhaust for the Mivec/Ralliart Model Lancer. We use the finest components, Magnaflow Stainless Muffler and 3.5 inch dual wall tip. Piping is 2.25 inches. Great deep sound!

$299.00

Add Item

CALL US FOR FITMENT DETAILS. There are some RAs made that will not allow use of this downpipe, about 1 out of 5 produced.

ROAD/RACE Stainless Steel Clutchline For Ralliart

This clutch line not only replaces the stock one but is designed to bypass the clutch slave modulator. This modulator is the orifice placed in the line that softens the engagement of the stock clutch. Perhaps you noticed how wimpy your stock clutch feels?

$69

Add Item

ROAD/RACE STAGE 1 Clutch Set- for Ralliart-

MANUAL TRANSMISSIONS


This clutch set fits Manual transmissions. It is a perfect replacement for the stock one but with more clamping force. This kit includes all parts needed to install the clutch. All components shown are included. With approximately 2200 lbs of force, it is stron enough to launch on but not too stiff for daily stop and go driving!

$459

ROAD/RACE Race Series Aluminum Flywheel

This flywheel is machined aluminum. It is a direct replacement for the stock Mivec flywheel. It cuts 10 lbs off the stock one for improved throttle response. The stock flywheel is heavier than an EVO flywheel and this motor benefits greatly from lightening the spinning components of the engine. Comes complete with starter ring built in. It is lighter and better constructed than the competition's!

No core required.

$469


Add Item

ROAD/RACE Race Series Motor Mounts 04-06

These mounts are a must for turbo motors or N/A guys who race. These mounts are complete replacements for front and rear stock mounts. They are urethane filled solid but not too stiff and will eliminate wheel hop when you launch and well as other problems related to severe engine movement. Now with Carbon Fiber reinforced filler!

$169 for the set

Add Item