ZEITRONIX WIDEBANDS
Works great on Lancers/RAs and the Tibby!
The Zeitronix Zt-2 the most affordable Wideband Air/Fuel Ratio Meter. Only
$279 including the Wideband Oxygen Sensor!
No matter if you have a stand alone engine management system or a piggy back
fuel control, the Wideband Air Fuel Ratio Meter is a must for a serious tuner!
Finally you can tune for more power, closer to the edge, precisely monitoring
Air/Fuel ratio Boost, EGT, RPM and throttle position datalogging. Up
to 9 hours of data with a rate of 74 samples per second, per graph.
|
|
 |
|
|
 |
Input/Output range
Lambda |
1.43 to 0.64 Wideband |
| AFR | 21.0 to 9.5 Wideband |
| Vacuum | 25.5 in Hg |
| Boost | 25.5 PSI |
| EGT | 200C to 1200C |
| Analog Wideband Output | 0 - 5V |
| Throttle Position | 0 -100 % |
| RPM | 0 - 10,000 |
| User Input | 0 - 5V |
Datalogging Software
The Zt-2 communicates with the PC Laptop via the serial port. The logging
software records up to 9 hours of data per single file. Different screen options
are available. The screen has a black background for easy night tuning.
The logging start, stop and pause accessible from keyboard shortcuts.
The digital gauge screen option could be used when purchasing the Zt-2 without
the LCD display.
| DIGITAL GAUGE | INDIVIDUAL PLOTS | OVERLAPPED PLOTS | SETTINGS |
 |
 |
 |
 |
Optional Parts:
Zeitronix Wideband LCD Display
Yes, you can be fast without the A-pillar gauges. The remote LCD display gives
you a stealth look and important data in high contrast digital format.
The aluminum enclosure dimensions are 4.7" x 2" x 0.9" , slightly
larger than the LCD display itself. The LCD fonts are bright white on a black
background. High contrast LCD digits are visible even in a direct sunlight.
A push of a button located on the right side of the LCD shows peak and hold
maximum AFR, Lambda, EGT and Boost values.
The LCD display communicates with the Zt-2 digitally through a serial interface.
This allows for a clean display installation in the car, since all heavy wire
connections are going to the Zt-2 controller and not the display head. The
display serial cable is thin, black and easily blends with the dash. The overlay
is made from hard coated, scratch resistant material.
The EGT Sensor
Zt-2 reads the exhaust gas temperature through a standard K thermocouple,
the same as used by most aftermarket EGT gauges. You can retrofit your EGT
probe with supplied Zt-2 style 2 pin connector or purchase a new probe from
us. Moreover, we offer 8' chromel-alumel extension wire with the Zt-2 style
connector in case you need to extend your EGT probe.Boost sensor is a 3.5
Bar absolute MAP sensor. The Zt-2's high resolution boost input in conjunction
with a Zeitronix Boost Sensor is more accurate than most boost gauges.
Note that the LCD Display, the EGT and Boost sensors are optional.
They are not needed to read the wideband air fuel ratio from the Zt-2.
Items included with each ZT-2 for $279
| Zt-2 Wideband Controller | 2 pin connector for EGT input |
| Bosch 5 wire Wideband Oxygen Sensor | Signal Harness |
| Oxygen Sensor Harness (10 feet length) | Datalogging software |
| Serial datalogging cable with RJ-12 to DB-9 | Instructions |
Optional Items
Cheap out now with just the ZT-2 for $279 and buy these parts later to turn
your Wideband Air/Fuel Ratio Meter into an entire tuning solution later:
| Wideband LCD display | $149 |
| 3.5 Bar Boost Sensor | $109 |
| EGT Sensor | $77 |
Zeitronix Packages
Or just do it right and get it all now for a cheaper price:
| ZT-2 Display Bundle ZT-2 Controller Wideband LCD display $399 |
ZT-2 Stage Eleventeen Package ZT-2 Controller Wideband LCD display 3.5 Bar MAP Sensor EGT Sensor $560 |
CALL TO ORDER
562-906-0080